如何为编程爱好者设计一款好玩的智能硬件（十）——无线2.4G通信模块研究一篇说完 - beautifulzzzz(9)_H5之家

HTML5技术

如何为编程爱好者设计一款好玩的智能硬件（十）——无线2.4G通信模块研究一篇说完 - beautifulzzzz(9)

字号+ 作者：H5之家来源：博客园 2015-10-09 15:17 我要评论( )

The TX mode is an active mode for transmitting packets. To enter this mode, the nRF24L01+ must have the PWR_UP bit set high, PRIM_RX bit set low, a payload in the TX FIFO and a high pulse on the CE f

　　The TX mode is an active mode for transmitting packets. To enter this mode, the nRF24L01+ must have the PWR_UP bit set high, PRIM_RX bit set low, a payload in the TX FIFO and a high pulse on the CE for more than 10μs.