如何为编程爱好者设计一款好玩的智能硬件（十）——无线2.4G通信模块研究一篇说完 - beautifulzzzz(13)_H5之家

HTML5技术

如何为编程爱好者设计一款好玩的智能硬件（十）——无线2.4G通信模块研究一篇说完 - beautifulzzzz(13)

字号+ 作者：H5之家来源：博客园 2015-10-09 15:17 我要评论( )

At 2Mbps the channel occupies a bandwidth wider than the resolution of the RF channel frequency setting. To ensure non-overlapping channels in 2Mbps mode, the channel spacing must be 2MHz or more. At

　　At 2Mbps the channel occupies a bandwidth wider than the resolution of the RF channel frequency setting. To ensure non-overlapping channels in 2Mbps mode, the channel spacing must be 2MHz or more. At 1Mbps and 250kbps the channel bandwidth is the same or lower than the resolution of the RF frequency.

　　The RF channel frequency is set by the RF_CH register according to the following formula:

F0= 2400 + RF_CH [MHz]

　　You must program a transmitter and a receiver with the same RF channel frequency to communicate with each other.

6、数据包处理方式：

nRF24L01 有如下几种数据包处理方式
　　 ShockBurstTM 与nRF2401 nRF24E1 nRF2402 nRF24E2 数据传输率为1Mbps 时相同
　　增强型ShockBurstTM 模式

7、ShockBurstTM 模式：